[Elof]

[erkky2002]

Hitachi Deskstar 7K250 160GB 7200rpm 8MB ATA100
NVidia NForce2 SPP/MCP

Random Acess Time: 12,4ms
Read Burst Speed: 92,5MB/s
Read Speed: maximum 65,6MB/s, minimum 32,4MB/s, average 49,9MB/s
CPU Utilization: 22.9%

[hoax]

[Nganasan]

[Morillo]

Nüid parandatud näitajad:

oma uue SATA Raptoriga, mis lõpuks endale soetatud,

Random Access Time: 8,6ms
Read Burst Speed: 97,1mb
Read speed: max 60,2mb/s; min 35,9mb/s; average 50,3mb/s

cpu utilization: 19,7 %

chip nForce2 ultra
ja ketas siis siliconi SATA kivi järel

[Ti]

Ketas Maxtor diamond max plus 9, 80GB, SATA, 8MB

Random Access Time: 15,3ms
ReadBurst :111,9MB/s
Read sepeed max 65.1 MB/s
min 30.6 MB/s
average 49.0 MB/s
CPU : 26.3%

Lõunasild VIA VT8237

[Prayer]

Tegin kah oma kastiga proovi ja olen tulemustes positiivselt üllatunud.
WD400JB (8-megase puhvriga) x 2 - proovisin mõlema kettaga mõned korrad ja suuri erinevusi polnud, tulemused esimesest testist master kettaga.
Chipset VIA Pro266TD, lõunasild VT8233 (WXP SP1a ja VIA PCI Latency Patch v020 beta21 peal)

Random Access Time: 13,4ms
Read Burst Speed: 83,2MB/s
Read Speed: maximum 51,7MB/s, minimum 24,6MB/s, average 42,2MB/s
CPU Utilization: 4.2%

Homme vaatan teise kastiga järgi, seal Seagate SATA 120GB ketas ja VIA KT600 chipset VT8237 lõunasillaga.

[SKG]

[hoax]

[SKG]

OK.. uus tulemus uute Silicon Image 3112 (BIOS 4.2.47) SATA RAID draiveritega:

Random Access Time: 8,5ms
Read Burst Speed: 117,3MB/s
Average Read Speed: 91,7MB/s
CPU: 5%

[Oliver112]

KT400 kiip, Maxtor ATA133 80GB 7200rpm 8MB ketas.

Access time: 12ms
Read Burst: 112 MB/s

Read Speed:
Maximum - 65 MB/s
Minimum - 33 MB/s
Average - 51 MB/s

[SirVorkars]

Maxtor6 Y060L0 60gb 7200rpm Ultra- Ata/133

Random Access 15ms
Read Burst Speed105,2MB/s

Read speed
Maximun-53,4 MB/s
Minimum 2.0 MB/s
Average 40,6 MB/s

[painkillah]

Hitachi Deskstar 7k250 2mb buffer 80gb
Random access time 17,6ms
Read burst speed 88,9MB/s
Read speed - Max 65.7 / MIN 11,5 / Aver 48,2
emaplaadiks siis abit nf7s

[Superglue]

Burst speed 187.4
Random Access 8.6ms
Average read 73.4

Asus P4C800E-Delux ja 2x raptor36GB raid 0

[Xayqo]

Seagate Barracuda 40Gb 2mb buffer, 7200rpm

Random acces time 14,3ms
Read burst speed 59,5MB/s

Read speed maximum 43,8MB/s, minimum 24,5MB/s, average 37,6B/s
CPU utilizatsion 25,7%

Emaplaat Abit KX7-333, ja sellel mingi VIA KT333 /VT8233A. Kuigi ma ei tea mida see kaldkriips peak siis tähendama?-Et esimene northbirdge ja teine siis south?

[arm2004]

[RCC]

natuke üllatuslikult suured numbrid on viimastel maxtoritel
kas via 237 shouthbridge on tõesti oma perfoomantsi enamvähem korda saanud???

[Arvo Cobrietti]

[RCC]

siiski 235-el on täpselt samad jamad ja enamgi veel
seega ongi üllatuslik et 237 hästi skaleerub

[capoguy]

Random access time 15 ms
Read burst speed 100.3 Mb/s
Read speed: max 79.8 Mb/s - min 20.3 Mb/s - average 44.1 Mb/s
CPU utilization 7.7

Kontroller: Silicon Image Sil680 ATA/133 RAID 0
2x HDD: 120GB Seagate 7200.7 ST-3120026A
CPU: Tualatin Celeron 1.1@1.46GHz
Mobo: Intel SE440BX-3

[SKG]

[vull]

Seagate Barracuda 120GB 8M, ATA 7200.7, 8.5ms
pole defragmenti teind kaua, ja 120gb-st mingi 8 vaba kah :p
systrayl paar proge kah

[Magic]

HD tach 3.0.1.0
Hitachi 160GB 8MB cache
Random acc: 12,4ms
Burst: 96,3MB/s
keskmine: 49,3MB/s
Hitachi'l on ikka powerit küllaga

[Piipz]

2xSamsung 160GB 8MB cache raid0
Pilt: http://piip.ee/hdtach.jpg
Burst: 154,0MB
Average: 83,4MB
Random acc: 13,5
CPU: 7%

tegelt raid kontroller veitsa imeb, adaptec ootab oma järge kunagi, praegu on seesama raid, mis on emmesse integreeritud. tulemus on küll hea, kuid mitte hea raidi kohta

[Wiki]

Chipset VIA VT8622/3 Apollo CLE266
Disk Drive HITACHI_DK23EA-30 (30 GB, 4200 RPM, Ultra-ATA/100)

Random access time 22 ms
Read burst speed 31,2 Mb/s
Read speed: max 30,0Mb/s - min 9,0 Mb/s - average 23,8 Mb/s
CPU utilization 4,6%