[mikk36]

SSD, 200€ videokaardiga kaevad kusagil 4€ päevas vähemalt.

[iks95]

300euro eest saab juba ka 38gh/s -lise aparaadi

[Randombit]

[Chidori]

Pisar tuli silma:

[SSD]

[Magic]

2,5-3 kanti pigem...

[InsidePC]

Mul hetkel GTX680 pumpab 330 gh/s ringis + siis 48 CPU i73770k ning kuskil 2€ kanti päev tuleb

[Chidori]

InsidePC, KH/s?

[Char]

[InsidePC]

[pyrex]

Spoiler

It's way too often that people think that a high ASIC % means "high quality". This is actually the opposite though. It denotes the leakage of the ASIC (GPU core) and ties in with TBP (total board power) or TDP (thermal design power). Graphics cards are designed to run with a specific power consumption and thermal output in mind. Higher ASIC % = higher leakage = higher power consumption = lower default voltage to keep temperatures/power consumption down within safe limits. Lower ASIC % = lower leakage = lower power consumption = higher default voltage, because the manufacturers want a consistent power consumption and thermal output.

If you run an 85% ASIC video card at the same voltage as the default voltage of a 65% ASIC video card of the same make and model, and run it in furmark with unlocked/maxxed out powertune, you will find that the 85% ASIC video card will likely have temperatures spiral out of control, and likely even turn off the system (This actually happened to me when I parted out my radeon 7970 mining rigs and tested them individually). Also, because of the increased power consumption, you will stress out the VRMs much more, especially in overclocking, possibly resulting in exploding VRM chips.

Typically, you will want the lowest ASIC % cards you can find. They will have a much larger headroom as far as power consumption (and by proxy, overclocking) goes, and will typically use less power and have lower temperatures compared to a high ASIC % card. As far as stable max overclock speeds, this is still a hit/miss situation.

Lugemist eelkõige neile, kes kaartide ASIC quality kohta eriti ei tea.

[Kristoferr]

[mikk36]

[yerba]

Täna on vaja õues lumecoine kaevandada, füüsiliselt.
Aga kaevandamise psühholoogiast - elu on näidanud et kaevandaja on kõige vaesem inimene üldse - nagu mingit raha tekib, on vaja kohe mingi uus arvutividin osta. Vähemalt minul on selline kiiks tekkinud nüüd. On kellelgi veel nii?

[Magic]

Ma arvan, et mingi eliitjupp pole raha mahaviskamine - mul OCZ toide kestis 7-8a. ja lõpuks suri see EE (Thanks Elektrilevi) surma.

Nüüd optimeerisin neid kaevureid ehitades, aga eelkõige seetõttu et pea kõik hea on kokku ostetud
Üks katkise piniga Gigabutt emaplaat vaja ka käima ajada...

[format666]

GA-990FXA-UD3 coinimiseks soliidne? mingi vahe mis prose sinna peale paneb?

(amd suht v66ras,senimaani koik inteli peale ehitatud)

[pyrex]

[KAMY]

Mis võib olla valesti, et undervolditud (R9280x - V=1,075) neljast kaardist kahele näidatakse sgmineris kõrgemat V (1,163 ja 1,200)? Kui panna kaart eraldi/üksi masinasse, siis on V=1,075.

[Kristoferr]

SGminer ja CGminer ei oska uuemate kaartide VDDC muuta ega monitoorida. Uskuda võid ainult GPUz mõõte.

[InsidePC]

Hetkel 6950 umbes 80€ maksta, et kaevandada on normaalne hind ?

[The_Boss]

InsidePC, teeb üle 400 tavaliselt ehk suhkoht 270 lähedale, aga on odavam.

[Magic]

[KAMY]

Palun smos Linuxi sgminer.confi Gigabyte R9280X kaardile. Windowsis kasutatud parameetrid, mis annavad vabalt avg 730khs millegipärast ei anna linuxis tulemust. Proovisin ka seda http://www.smos-linux.org/cfg/gigabyte.280x , kuid jääb madalamaks, kui windowsis.

[kivilaid]

[ollumees]

Oleks väga vaja üht pcie1x to 16x kaablit. Olen nõus ka üle maksma, tahaks lihtsalt kogu rigi täna jooksma saada. Pakkumine PM.